Before ordering a kit please read the instruction manual. To download the instruction manual CLICK HERE If at least one of your channels is working, our kits will completely restore and improve your amplifier. If neither channel is working, you should test the transformer before ordering. To download the test proceedure CLICK HERE

You will need the following basic tools:
A pair of wire cutters, wire strippers, assorted screwdrivers, a soldering iron, test leads with clips, and safety glasses

You will need the following electronics tools:
An anti-static wrist strap. A good quaility digital multimeter that measures to 4 digits. A second multimeter is very useful but not absolutely necessary.
An autotransformer, sometimes called a Variac. It is a variable transformer and will be used during the adjustment of the amplifier after assembly is complete. If you do not own one, they can be purchased new or used on eBay for $20.00 on up, depending on the size. The adjustments will be made with no load on the amplifier, so a small 1 amp Variac will do the job.

You will need the following materials:
1amp fuses and 2 watt 1ohm resistors, five of each for testing the amp, solder, thermal grease, and silicone adhesive.